Imagine a car equipped with nothing more than a laptop computer, a portable GPS receiver, and a wireless network card slowly strolls through your neighborhood. Unknown to any onlookers, this is no ordinary vehicle; rather, it is a wardriving machine.
As the car strolls past homes and businesses, a wireless network card (available at any electronics store for as low as $ 25) scans for any wireless access points. Anyone with a wireless network (and there is many out there) is vulnerable. The computer is looking for what is called an SSID.
An SSID is your wireless network name and it is being constantly transmitted by your access point, letting commuters know of its presence. The wardriver uses software such as Netstumbler (for windows) or Cismet (for Linux) to scan the airwaves for SSIDs. The program can track various access points at once and monitor the signal strength.
These programs can also check to see if the network is encrypted. The wardriver will generally configure its or her software to log any strong unencrypted signals. Using the GPS receiver, the coordinates of the strong signal will be recorded.
After this preliminary drive, the wardriver can return to the locations that were recorded, and connect to the access point. Once connected to an unencrypted network, the wardriver can use the victim’s internet access, and can also explore computers on the network.
If files are being shared within someone’s private network, all of that information is susceptible to a wardriver. Furthermore, once in the network, a wardriver can sniff network traffic and can view any information such as passwords and credit card numbers you send out to the internet – even SSL secured data.
Wireless network vulnerability is a major problem, and as more and more households purchase wireless technology, the problem of insecure networks increases. Sound scary? Well, this happens every day, and it does not take an expert to pull off. It does not take an expert to protect against either, however.
Steps you can take to protect your wireless network:
There are a number of very simple steps you can take to protect your wireless network. For many of these, you will have to access your router configuration utility (check your manual on how to do this, you will generally need to type an IP address into your browser such as 192.168.0.1 or 192.168.1.1).
1. Do not broadcast your SSID.
If you are broadcasting your SSID, this is the first thing a program will pick up and recognize. If you configure your router to not broadcast your SSID, it will be difficult to detect (but not impossible, for some software can sniff wireless communication, so if you are using your wireless network, the SSID can be revealed).
If you are not broadcasting your SSID, but it can be guessed (such as if you are using a default SSID), cloaking is pointless. Due to this, remember to change your SSID from the factory default. This is not a 100 percent effective method to secure your network, but it is a good first line of defense.
2. Change the default password.
When you buy a router, a factory password is stored. People experienced in working with routers know the default passwords for different routers (and the make of the router can be seen by wardriver software such as netstumbler). It is important that you secure your router with a good password.
Encrypt your wireless communication. I can not stress the importance of encrypting your wireless communication enough. Enable encryption and enter a key. Most routers are only capable of WEP encryption, but if they permit, use EAP encryption, it’s more secure than WEP.
Like cloaking your SSID, encryption is not 100 percent secure. Given sufficient time and determination, if someone wants to target you and access your network, WEP encryption can be bypassed using software such as AirSnort.
3. Filter the MAC addresses.
This would require that you enter your router configuration and input the MAC address of each wireless card you have. This will restrict access so that only your computers can connect to the router.
You will need to obtain the MAC address (which is the individual identification address of a network card in the form a 12 digit hexadecimal number). If someone sniffs traffic and detects the MAC address of a computer wirelessly using your network, the wardriver could emulate that address and connect to the router, but this takes time.
If you configure file sharing on your computers, make sure it is password protected. You should not share files on your networked computers unless it requires an authenticated user to access. Set up the same user accounts on your machines so that your computers can share files.
With these relatively simple steps, wireless network users can secure their networks from wardrivers. Wireless networks are inherently insecure, and these tips will surely help you greater secure your network.
If someone is really determined to gain access to your network, given enough time, a good hacker can get access. These tips will deter the average wardriver from gaining access to your network, however.
Although these methods are not definite security measures, they will change your network from being something that can be hacked in a matter of seconds, to something that will take a determined hacker days if not weeks of work, all of which will have to be done while in close proximity to your network.
If you have any experience in securing a wireless network, please leave a comment.